Henan Xinke Analytical Instruments Co.,Ltd

XKGF-8000 Automatic Industrial Analyzer Industrial Analyzer Product Name: Automatic industrial analyzer Product Type: XKGF-8000 Scope: Coal, electric power, chemical, geological survey, environmental protection, quarantine inspection, scientific research and other related industries and departments and colleges test materials such as coal, coke, moisture, ash content, volatile, and calculate the fixed carbon, hydrogen content and calorific value; To analyze the carbon content of fly ash, ash; To analyze the ignition loss of cement. Features: 1.Test process: the process specification, the results are accurate, the moisture, ash content, volatile processes, conditions, and the results can satisfy the requirements of national standard, don't need to do a correction, can be used for umpire analysis. 2.The interface way: using CAN bus technology, using shielding device and lightning protection circuit, stimulate the magnetic interference and interference resistance. 3.Fast test: boot can be tested, using multiple furnace double balance structure, with constant temperature drying device, moisture, ash content, volatile matter determination of three indicators can be any combination or single, at the same time test of 20 samples of three indicators can be completed in 90 minutes (rapid process). 4.Equipment of water and gas supply module: using low noise piston pump, (via available nitrogen and oxygen). 5.Control mode: a machine control. More effective control operation is not affected by host computer unilaterally caused uncontrollable. Fault alarm to protect themselves. And with unique technology of feature between micro displacement to make precise positioning. 6.The analysis test system: can connect the company most of the coal quality analysis equipment. Can automatically upload the data, the production report. 7.Water cement equipment adopts pneumatic automatic switch door slowly way, avoid quenching heat of furnace body damage. 8.Volatile equipment with double guide translation technology, ensures the docking between each two samples and the chamber of a stove or furnace. With a standard for crucible, without artificial participation, without nitrogen. 9.Data accurate and reliable, using automatic thermogravimetric analyzer method, balance record the raw data to calculate. 10.Adopt unique balance temperature drift correction function, make the weighing data more accurate. 11.Each time all can be used ash test classic slow ash, within not less than 30 min that fully meet the requirements of national standard temperature up to 500 ℃, guarantees the ash on the accuracy of the test. Technical parameters: The sample weight: 0.8-1.2g Size: ≤0.2mm Furnace temperature range: room temperature ~ 1000 ℃ Temperature accuracy: ±1℃ Temperature control points: moisture 105 ~ 110 ℃, ash 815 + 10 ℃, volatile 900 + 10 ℃ Test time: 90 min < / 20 samples (moisture content, ash content, volatile and fixed carbon) Voltage: 220±22VAC 50±1HZ Maximum power: <5KW Accuracy: meet and surpass the national standard Size mm: Water gray Part: 480*520*700， Volatile components: 660*450*820